1. First of all, before installation, it is important that the dimensional efficiency requirements of the efficient air supply outlet must meet the requirements of clean room site design and customer application standards.
2, high efficiency air supply outlet before installing needs cleaning cleaning products and all-round clean room cleaning the clean, such as purification of air conditioning system dust, shall be removed for cleaning, must do to meet the requirements of clean standard and sandwich or ceiling also needs to clean, purify the air conditioning system must be continuous operation test run again more than 12 h, cleaning again.
3. The safe transportation of the high-efficiency air supply port shall be in strict accordance with the directions specified by the manufacturer's marks, and it shall be handled and handled gently in the transportation process to avoid violent vibration and collision.
4. Before installing the high-efficiency air supply port, the appearance of the air supply port package should be inspected on the spot, including whether the filter paper, sealant and frame are damaged; Whether the side length, diagonal and thickness dimensions meet the requirements; Frame without burr and rust (metal frame); Whether there is a product qualification certificate, whether the technical performance meets the design requirements.
5, to carry out leak detection of high efficiency air supply outlet, check and check whether the leakage is qualified, the installation should be based on the size of the resistance of each air supply outlet for reasonable allocation, for one-way flow, the rated resistance of each filter and the average resistance of each filter should be less than 5% between the same wind outlet or the air supply surface. The cleanliness level is equal to and higher than 100 clean room efficient air outlet.
6, clean room needs to install efficient air outlet flanges and joints between the ceiling plate gasket processing, remember that cracks must be strictly handled. Avoid high-efficiency air supply port damage or coating damage shall not be installed, air supply port installation and duct must be strictly connected, the opening end with plastic film and tape reinforcement air treatment.
