The pharmaceutical industry's requirement for health and safety is a serious challenge to hepa technology. Dust can cause pollution, health damage and explosion risk. Therefore, the use of high efficiency filters is essential.
In general, equipment downtime is reduced and equipment efficiency and reliability are improved. The preparation of tablets and capsules and the purification of apis will produce higher concentrations of dust. The dust may pose a health hazard to operators and pose a risk of explosion. High-tech filtration system must meet the requirements of sealing and explosion protection, and ensure the filtration level. Together, these three aspects form the core value of a high quality dust removal system: continuity, high filtration efficiency, while maintaining a small amount of work. TRM extensively optimizes the performance of the filter elements (which can be cleaned and replaced at any time) : the design and control of the filter elements, the cleaning techniques and cleaning procedures for the filter elements.
Therefore, the service life of the filter can be extended to more than one year. The advantages of very limited safety design and long service life of filter elements are not only high operating costs, uninterrupted operation, but also a healthy and safe working environment. In the past, dust collection and disposal were considered possible in open systems. Today, more and more apis require comprehensive and measurable closed processes. Therefore, it is not easy to replace the filter element.
In view of the requirements of the REACH directive (European regulations on the registration, evaluation, authorization and regulation of chemicals), the directive will be implemented by mid-2018, not only in the pharmaceutical industry but also in many other industries. Due to a variety of reasons, such as dust or mower process adjustments, a large amount of dusty air flow is generated in the clean solid formulation, which must be safely separated from process gas. Cleaning and replacing the filter element is a very important focus in a deliberately detailed shutdown solution. Replacement of filter elements under limited conditions usually requires bagging/sealing techniques. It takes about an hour for two workers to replace the filter element. In this case, the long life of the TRM filter is to minimize the cumulative risk of incorrect operation. Because of the distance between the filters, the health risks are low.
